Button image: Home Page Button image: Contact Us
Button image: Wall Ties Button image: Masonry Restraint Button image: Masonry Support Button image: Windposts Button image: Parapet Posts Button image: Lintels Button image: Channels Button image: Fixings Button image: Sockets
Design Considerations button image
GAAS Masonry Support Angle button image
Masonry Support System button image
Bracket Masonry Support button image
Stone Support Brackets button image
SW Channel and Ties button image
25-14 Brick Tie Channel button image

 

GA Fixings
Unit 34
Claycliffe Business Park
Cannon Way
Barugh Green
Barnsley
S75 1JU

Tel: 01226 380779
Fax: 01226 385558

Email: info@gafixings.com

GA/IB & GA/IBS Individual Bracket Masonry Support

 

G.A. Individual masonry support brackets are generally used when the use of continuous support is difficult to achieve such as curved brickwork or where masonry is supported from above such as soldier courses.

G.A. Individual brackets are designed for each specific application ensuring the most cost effective solution for any given loading criteria.


Adjustment

The use of welded serrated pads and punched vertical slot on both the angle and system type brackets offers up to +/- 30mm vertical adjustment.

Specifying

To specify G.A. Support Brackets follow the code as shown.
Note:-The cavity will determine whether an angle or a system is used. Brackets can be supplied with a plain horizontal slot if required.

GA / IB1

GA / IB2

GA / IB3

GA / IB4 GA / IB5
Ref: GA1 DD140 Type 1 Ref: GA2 DD140 Type 2 Ref: GA4 DD140 Type 4

GA / IBS1

GA / IBS2

GA / IBS3

GA / IBS4 GA / IBS5
Ref: GA1 DD140 Type 1 Ref: GA2 DD140 Type 2 Ref: GA4 DD140 Type 4

Service

G.A. undertake the design of the system and fixings required and will also produce layout drawings detailing the fixing positions, angle lengths and sectional details issued for approval prior to manufacture.
Example shows brickwork supported by individual brackets fixed back to concrete using M.D. Anchors.

The soldier course brickwork is suspended using stirrups projecting from the underside of the bracket in conjunction with stitching rods built into the brickwork.

The brickwork soffit is suspended using a soffit angle fixed back to the concrete soffit using M.D. Anchors again in conjunction with stitching rods built into the brickwork.